Download latest Android Jelly Bean 4.2.2 stock firmware for Cube Talk 7X / U51GT-WB tablet
Download latest Android Jelly Bean 4.2.2 stock firmware for Cube Talk 7X / U51GT-WB tablet from here or from here. Download another Cube firmware from here.
Archive name: TALK7X_v1.4-20140820(U51GT-WB)
Archive file size: 350 MB
Project: htt82_tb_jb5
Platform: MT6582Archive file size: 350 MB
Project: htt82_tb_jb5
Config_version: V1.1.1
Baseband: MT6582_S00_MOLY_WR8_W1315_MD_WG_MP_V12_P6_1_wg_n
Installing the ROM
1. Run flash tool “the Flash_tool.exe”
2. Choose “Scatter” file.
3. At this point, you need to remove the battery from your device and connect the device to a USB 2.0 port on your PC (USB 3.0 is not supported). You should start hearing the “dings” in Windows to signify that it detects your device.
4. Click the Download button on the Flash Tool.
5. If your device is connected properly, you will see the percentage bar change colors and start running. The one to watch is the yellow bar that goes from 0-100% indicating that the ROM is being flashed.
6. You will then get a window with a green circle, indicating that the flash is complete.
7. When the flashing process is done, disconnect the USB cable and replace the battery in your device and turn on the device. Your device will then boot into the newly installed ROM.
2. Choose “Scatter” file.
3. At this point, you need to remove the battery from your device and connect the device to a USB 2.0 port on your PC (USB 3.0 is not supported). You should start hearing the “dings” in Windows to signify that it detects your device.
4. Click the Download button on the Flash Tool.
5. If your device is connected properly, you will see the percentage bar change colors and start running. The one to watch is the yellow bar that goes from 0-100% indicating that the ROM is being flashed.
6. You will then get a window with a green circle, indicating that the flash is complete.
7. When the flashing process is done, disconnect the USB cable and replace the battery in your device and turn on the device. Your device will then boot into the newly installed ROM.
