Crew RKTablets Genio CM10.1 v1.3.3 firmware installed on Pipo S1 tablet





1. Backup your data.
2. Download the CM10.1 archive from here, here or here; extract 'PipoS1_CM10.1_v1.3.3.rar'. Copy 'Oma RK30 CM10.1 Format NAND.zip' file to a microSD card.
3. Hard-off the tablet by long pressing the power button (4+ seconds). Insert microSD card. Hold down the VOL- button while inserting microUSB cable to enter download mode
4. Start the 'RKAndroidTool.exe' found in the 'RKDevelopTool_v1.35' folder (right-click, run as administrator). NOTE: The tool should say 'Found RKAndroid Loader Rock Usb'. Hit 'EraseIDB' and wait for success (Clears partition table) and then hit 'Run' once. INFO: Run OK', Pipo S1 will boot into recovery --> **RECOVERY SHOULD BE v6.0.3.1**
5. Wipe cache, Wipe data/factory reset, Install zip from external card 'Oma RK30 CM10.1 Format NAND.zip' and reboot. Wait 5 minutes.
6. Once the tablet starts, select your prefered launcher, hit 'immer' (always).
7. Set the language to English: Hit the setting icon, 'Systemeinstellungen', Scroll down to 'Sprache & Einabe', Set 'Sprache' to your desired language.
8. Fix landscape menu buttons not appearing. Go to play store, sign in. Install Textdroider DPI from play store. Set DPI to 120. Apply. Reboot. HINT: to use back & navigate button use the tablet in portrait mode.
9. Optional: If you want back the tablet interface with bottom notification bar then download TabletUI fix v1.3.2 and install it from microSD card via CWM.
 


What's new:
- a2dp fixed
- gapps updated

 Hints:
- enable development options > tap 5 times on build number
- higher performance > disable animation scales in developer options
- control Play-Store > disable auto-updates
- battery drain > set keep wi-fi on during sleep to never
- full access to the build > enable /system rw in File Manager HD
- load kernel modules > enable init.d ON in Pimp my Rom (reboot)
- don't show su notifications > disable in Superuser

Unresolved Issues:
- Wifi takes a few seconds to connect from sleep
- camera is upside down
- display artifacts on screen rotation

Troubleshooting:
Problem: If you get stuck with installs the loop you back to recovery constantly, you probably have CWM-based Recovery v6.0.1.5. This recovery does not work with the original Pipo S1 kernel.
Solution: Use recovery 6.0.3.1 with kernel RK3-_kernel_308_s1_pipo

Problem: You find yourself stuck in recovery with no way to power off
Solution: Select a menu item, highlight ++++Go Back++++, when you press the power button, do not let go until tablet powers off.


Build details:
- CyanogenMod 10.1 / Android Jelly bean 4.2.2
- Kernel 3.0.8+
- this firmware has root acces.
- Languages: all
- gapps are preinstalled
- Another preinstalled apps: AdAway, Apollo, CPU Tweaks, DSP Manager, File Manager HD, MX Player, Nova Launcher, Pimp My Rom, RebootMenu, Terminal Emulator, USB Host Controller, Viper4Android FX, etc...
- Antutu Benchmark score: about 10.000 points at 120 dpi;
- Build number: Oma RK30 CM10.1 v1.3.3 - 23.10.2013


Credits for this great ROM goes to Oma.
Credits for this tutorial goes to trenchtractor.



Always keep in mind that this is not a review, just a first sight of this firmware. You have to test it more for another details, to see if it satisfies your needs.Be aware: it is your own risk! 
video uploading

Android 4.3 Premium Suite update for Galaxy Note2 and Galaxy S3 S4

Saumsung announced the Android 4.3 update is about to release in the coming weeks for Galaxy Note2, Galaxy S3 and S4. according to the announcement, the Premium Suite update will be rolled out today in US first by Verizon (read the official Samsung announcement for the update here)

this update adds KNOX, plus some enchancements for the camera, etc, while those highly expected new features from the Galaxy Note 3 are unlikely to be included completely but Group Play 2.5 is shipped in this update

Hello Kitty Galaxy Tab 3 edition - logo, wallpapers, theme and more

good news to all Hello Kitty fans!! Samsung is going to release a special version of Galaxy Tab 3 7.0 - the Hello Kitty edition!



a little Hello Kitty logo is printed on the home button (as shown in the image below) as well as a larger one on the back of the phone. the device will be preloaded will Hello Kitty theme, wallpaper and icons. which is pretty cool, and surely the fans will love it






be sure to watch the video in youtube here


it is expected this special edition comes with the same hardware configurations as the Galaxy Tab 3 7.0 on the markets, and to be available at the end of October, or early November 2013


images source: sammyhub.com

Crew RKTablets Genio CM10.1 v1.3 firmware installed on Pipo S1 tablet




1. Backup your data.
2. Download the CM10.1 archive from here, here or here; (uploading) extract 'PipoS1_CM10.1_v1.3.2.rar'. Copy 'Oma RK30 CM10.1 Format NAND.zip' file to a microSD card.
3. Hard-off the tablet by long pressing the power button (4+ seconds). Insert microSD card. Hold down the VOL- button while inserting microUSB cable to enter download mode
4. Start the 'RKAndroidTool.exe' found in the 'RKDevelopTool_v1.35' folder (right-click, run as administrator). NOTE: The tool should say 'Found RKAndroid Loader Rock Usb'. Hit 'EraseIDB' and wait for success (Clears partition table) and then hit 'Run' once. INFO: Run OK', Pipo S1 will boot into recovery --> **RECOVERY SHOULD BE v6.0.3.1**
5. Wipe cache, Wipe data/factory reset, Install zip from external card 'Oma RK30 CM10.1 Format NAND.zip' and reboot. Wait 5 minutes.
6. Once the tablet starts, select your prefered launcher, hit 'immer' (always).
7. Set the language to English: Hit the setting icon, 'Systemeinstellungen', Scroll down to 'Sprache & Einabe', Set 'Sprache' to your desired language.
8. Fix landscape menu buttons not appearing. Go to play store, sign in. Install Textdroider DPI from play store. Set DPI to 120. Apply. Reboot. HINT: to use back & navigate button use the tablet in portrait mode.
9. Optional: If you want back the tablet interface with bottom notification bar then download TabletUI fix v1.3.2 and install it from microSD card via CWM.

Hints:
- enable development options > tap 5 times on build number
- higher performance > disable animation scales in developer options
- control Play-Store > disable auto-updates
- battery drain > set keep wi-fi on during sleep to never
- full access to the build > enable /system rw in File Manager HD
- load kernel modules > enable init.d ON in Pimp my Rom (reboot)
- don't show su notifications > disable in Superuser

Unresolved Issues:
- Wifi takes a few seconds to connect from sleep
- camera is upside down
- display artifacts on screen rotation

Troubleshooting:
Problem: If you get stuck with installs the loop you back to recovery constantly, you probably have CWM-based Recovery v6.0.1.5. This recovery does not work with the original Pipo S1 kernel.
Solution: Use recovery 6.0.3.1 with kernel RK3-_kernel_308_s1_pipo

Problem: You find yourself stuck in recovery with no way to power off
Solution: Select a menu item, highlight ++++Go Back++++, when you press the power button, do not let go until tablet powers off.


Build details:
- CyanogenMod 10.1 / Android Jelly bean 4.2.2
- Kernel 3.0.8+
- this firmware has root acces.
- Languages: all
- gapps are preinstalled
- Another preinstalled apps: AdAway, Apollo, CPU Tweaks, DSP Manager, File Manager HD, MX Player, Nova Launcher, Pimp My Rom, RebootMenu, Terminal Emulator, USB Host Controller, Viper4Android FX, etc...
- Antutu Benchmark score: about 10.000 points at 120 dpi;
- Build number: Oma RK30 CM10.1 v1.3.2 - 05.10.2013


Credits for this great ROM goes to Oma.
Credits for this tutorial goes to trenchtractor.



Always keep in mind that this is not a review, just a first sight of this firmware. You have to test it more for another details, to see if it satisfies your needs.

RKM trademark was registered in EU


Congratulations! Shenzhen Rikomagic Technology Co.,Ltd  managed to successfully register the new RKM trademark in the European Union.


Download Android tablets & phones USB Driver Pack


Download Android tablets & phones USB Driver Pack from here, here or here.

This pack contains:

- A1x_Livesuit_109_32bit_64bit
- Google_Android_ADB_USB_Driver_Rev7
- HTC_Driver_4.0.0.009 
- Huawei Ascend G300 u8815
- Infotm_ADB_32bit
- Infotm_ADB_64bit
- Infotm_OTG_Driver
- Infotm_USB_Driver
- LG_United_Mobile_Driver_3.8.1
- MaPan_USB_Driver_Win7
- preinstall
- Rockchip_X64-64bit
- Rockchip_X86-32bit
- Rockusb_v3.5
- Samsung_Usb_Driver_1.5.15.0
- USB Device (VID_1f3a_PID_efe8)
- WM8850_ADB_Drivers


Enjoy, share is love! ;)


Galaxy Note 2 Android 4.3 N7100XXUEMI6 Leaked

a leaked version of Android 4.3 for Galaxy Note 2 was available for download couple of days ago. it is stable enough for daily use and you can even run some of the apps from the Galaxy Note 3

note that this is a pre-release or test version but it will not increase your flash count


image source: sammobile.com


download link:
link 1 - pre rooted rom



Galaxy S4 Android 4.3 I9505XXUEMI8 Leaked

a leaked version of Android 4.3 for Galaxy S4 was available for download couple of days ago. ppl claimed it is stable and performance boost observed

note that this is a pre-release or test version but it will not increase your flash count


image source: sammobile.com


download link:
link 1 - original Odin files by sammobile
link 2 - pre rooted Odin or cwm file

Cyclone Voyager 2 will be available from tomorrow


Sumvision has just announced that the new Cyclone Voyager 2 7.9" quad core tablet will be available on the market beginning with 5th october 2013!


Quad Core! The First For Sumvision!
Using the latest A9 Rockchip 28 nm Quad CPU. This tablet provide nonstop raw power to your hands. Fast speed in gaming and apps!

More RAM ! 2GB RAM
More ram, open more apps without costing performance and speed! multiple task for voyager 2 has just become more easily

Android 4.2
Using android 4.2 operating system to provide most secure and optimise performance for the Cyclone Voyager2 .(Early models of the Voyager2 10.1" has 4.1 but can be upgraded to 4.2)

Benchmark Champ
Without doubt the Voyager 2 has some impressive benchmark result, it easily competitive with some the top brand tablets and phones in the current market. Faster than the Google Nexus tablet and Samsung Galaxy Note 10.1 (benchmark is done by leading benchmark software for Android device Antutu)
     
Miracast 2.4/5 GHZ (Mirror your android direct to big screen wirelessly)
Using 4.2 Android O/S, you can embraced the new technology which can show all your android contents direct to big screen (TV) wirelessly.Photos,movies,gaming even the main interface screen duplicated onto the TV. Some Voyager 2 tablet models will have 5Ghz support providing faster and more real time contents transfer than using 2.4Ghz.
Please note a Mircast 2.4/5Ghz dongle/receiver is required. Recommend to use 5ghz network.

Extreme Sharp HD Display
High definition display panel over 2048x1536 resolution is available for the Voyager 2 9.7" tablet...
     
Bluetooth Ready
Cyclone Voyager 2 with its built-in Bluetooth support, can connect to any other bluetooth peripherals to enhance the entertainment and features of the Voyager Tablet. Connect to bluetooth speakers and listen to better sound quality. Connect to a bluetooth keyboard for faster and more accurate typing. So many support possibility Cyclone Voyager 2 bluetooth can provide.(all models except 7inch has bluetooth)

HDMI make it big on TV!
Connected using an HDMI cable(not included) you can display everything on the tablet direct to the big screen (no slow down.) Enjoy your movies, music and pictures and share with family and friends.

Capacitive IPS Screen and multi-touch
Cyclone Voyager 2 uses the latest capacitive IPS screen technology to provide fast responsive access to your applications. Multi touch provides zoom in and out functions using your finger tips, great for Internet browsing. IPS Technology provided a more clearer and more colourful display.