DUNIA ANDROID

Home » Archives for April 2014

Video HD: Cloudnet CR11S 4.4.2 20140411 firmware installed on RKM MK902 TV Box

Posted by android team Rabu, 30 April 2014 0 comments

Download Cloudnet CR11S 4.4.2 20140411 firmware from here, here or here.

About this firmware version
- Android KitKat 4.4.2
- Screen resolution: 1280 x 720 @ 60 Hz
- Score in new Antutu Benchmark: 19.182 points;
- this firmware is not rooted;
- Kernel version: 3.0.36+
- Build number: CR11S_cloudnetgo_rk3188-eng 4.4.2 KOT49H eng.zz.20140411.095242 test-keys
- Boot version: 2.13
- Miracast support / WiFiDisplay app
- Play Store / gapps preinstaled
- Rockchip OTA update support

Instructions

1. Download the firmware archive and extract it on desktop.

2. Second, connect MK902 to your computer. Prepare an USB cable (male USB to male USB cable); insert one USB port to computer usb host. Prepare also a thin metal stick; press the recover button like in the image below. Don’t loose the stick, at same time, insert the another USB port to the unit USB slave port. After 3-5 seconds, loose the stick.

3. Install driver using RK Driver Assistant.

4. Burn the image with Rockchip Batch Tool v1.7 using 'Restore' button.

This process will take about 4 minutes, please wait patiently, during recovery/upgrade, don’t remove the USB cable and don’t power off during updating or recovering. First reboot of the unit after recovery/update will take more long time than usual, and even occur some lag issue, it’s normal since internal apk files need to be decompressed and occupy RAM, after 5 minutes, then system will be running well. So don’t worry about that.

Download stock firmware for E-ceros Revolution tablet

Posted by android team 0 comments

Download Android Jelly Bean 4.2 stock firmware for E-ceros Revolution tablet from here, here or here. CVNZ-9470-White_FW = Q9white_update_FT5406_20130806.img

Now you can buy E-ceros Revolution tablet from www.chinavasion.com for a special price as low as 145.50 Euro.

E-ceros Revolution tablet specifications

Operating System:	Android 4.2
Hardware Chipset:	CPU RK3188 Quad-core ARM Cortex-A9 GPU Mali-400 MP
Speed:	CPU 1.6GHz GPU 533MHz
RAM:	2GB
Screen:	Third Generation HD 10 Point IPS Retina Screen
Screen Size:	9.7 inches
Screen Resolution:	2048×1536 264PPI
Ports/Slot/External Sensors:	Micro SD Card Slot 3.5mm Audio Jack Speaker HDMI Micro USB DC IN
Internal Memory:	16 GB
External Memory:	Micro SD Card up to 32GB
Battery Life:	About 6-7 Hours (Depending On Usage)
Standby Time:	72hrs
Battery capacity mAh:	8000
Camera Resolution:	0.3MP Front Facing Camera 5MP Back Facing Camera
Picture format:	JPG, GIF, BMP, PNG
Video format:	Mpeg1, Mpeg2, Mpeg4, SP, ASP, GMC, XVID, H.263, H.264, BP, MP, HP, WMV7/8/9, VC1, AP, VP6/8, AVS, MJPEG
Music Formats:	MP3, WMA, FLAC, AAC, WAV, OGG, MP2, MA4
WiFi:	YES (B/G/N)
3G:	YES (Via USB 3G Dongle)
Bluetooth:	YES
Languages:	Afrikaans, Bahasa Indonesia, Bahasa Melayu, Dansk, German, English, Spanish, French, Italian, Magyar, Dutch, Polish, Portuguese, Vietnamese, Turkish, Greek, Russian, Arabic, Thai, Korean, Chinese (Simp), Chinese (Trad), Japanese
Certification:	CE, FCC, RoHS
Dimensions (mm):	240 x 187 x 9.8 (L x W x H)

Chinavasion is a global China wholesale and China dropshipping company located in Shenzhen, China right across the China-Hong Kong border. Established in 2006, Chinavasion was the first company ever to offer electronics drop shipping directly from China.

E-ceros. A rising star among China-designed electronics companies, applying the latest technology to create great products for the tech-savvy gadget lover. ‘Beyond Imagination’ describes exactly what excites the E-CEROS team to deliver the very best quality to price ratio. The company is dedicated to developing innovative consumer electronics and efficient processes that foster invention, enrich people’s lives and continue to spur the rise of our high quality electronics brand beyond imagination. We hope to exceed your expectations and make your life more convenient and exciting than it is now.

Download stock firmware for E-ceros Create tablet

Posted by android team 0 comments

Download Android Jelly Bean 4.2 stock firmware for E-ceros Create tablet from here, here or here.

Now you can buy E-ceros Create tablet from www.chinavasion.com for a special price as low as 36.30 Euro.

E-ceros Create tablet specifications

Operating System:	Android 4.2
Hardware Chipset:	RK 3026 CORTEX A9 dual core
Speed:	CPU 1.6GHz
RAM:	512MB
Screen:	5 point capacitive touch screen
Screen Size:	7.0 inches
Screen Resolution:	800×480
Ports/Slot/External Sensors:	Micro SD Card Slot 3.5mm Audio Jack Speaker Micro USB DC IN
Internal Memory:	4 GB
External Memory:	Micro SD Card up to 32GB
Battery Life:	About 2-4 Hours (Depending On Usage)
Standby Time:	72hrs
Battery capacity mAh:	2200
Camera Resolution:	0.3MP Front Facing Camera 0.3MP Back Facing Camera (2MP Interpolation)
Picture format:	JPG, GIF, BMP, PNG
Video format:	Mpeg1, Mpeg2, Mpeg4, SP, ASP, GMC, XVID, H.263, H.264, BP, MP, HP, WMV7/8/9, VC1, AP, VP6/8, AVS, MJPEG
Music Formats:	MP3, WMA, FLAC, AAC, WAV, OGG, MP2, MA4
WiFi:	YES (B/G/N)
3G:	YES
Bluetooth:	No
Languages:	Afrikaans, Bahasa Indonesia, Bahasa Melayu, Dansk, German, English, Spanish, French, Italian, Magyar, Dutch, Polish, Portuguese, Vietnamese, Turkish, Greek, Russian, Arabic, Thai, Korean, Chinese (Simp), Chinese (Trad), Japanese
Certification:	CE, FCC, RoHS
Dimensions (mm):	190 x 115 x 10 (L x W x H)

Download Jelly Bean 4.2 stock firmware for Ceros Motion B tablet

Posted by android team Selasa, 29 April 2014 0 comments

Download Android Jelly Bean 4.2 firmware for Ceros Motion B tablet from here, here or here.

APDB_MT6589_S01_MAIN2.1_W10.24
BPLGUInfoCustomAppSrcP_MT6589_S00_MOLY_WR8_W1248_MD_WG_MP_V13

Designing life-changing products, Ceros aims to bring mobile technology to a broad audience at an affordable price while keeping the quality of the product high. Ceros started developing the “Motion” from the idea that technology should facilitate the user to stay mobile and as a 7 Inch hybrid tablet, the “Motion” combines the portability and connectivity of a Smartphone with the immersive media experience of a Tablet PC. Thats what makes the “Ceros Motion” truly unique. This is due to the reason that the 'Ceros Motion' is packing two SIM Card slots (2G and 3G), meaning youll be able to manage two different phone numbers on just one device as well as surf the internet when not on a wifi network. Insert your work and private SIM cards and use the “Ceros Motion” while traveling to have a local number and your personal number active at the same time.

Packed with powerful hardware such as a 1.2GHz Quad Core CPU, the “Ceros Motion” is a true powerhouse of a phablet. Bring your apps, video and multimedia to life and experience ultra smooth navigation like never before. All of this packed in a slim and stylish body and enabling you to place phone calls, browse the web and organize your agenda in all comfort.

Take advantage of the large 7 Inch HD IPS screen the “Ceros Motion” is equipped with to effectively multitask and view whole pages with less scrolling. This at an HD resolution of 1280x800, displaying your multimedia crisp and clear and letting you watch HD movies on the go. Wherever you go, from the commuting trip to work to the road trip to Las Vegas, the “Ceros Motion” will accompany you and offer you unlimited entertainment.

Running on Android 4.2, the “Ceros Motion” enables you to be mobile and to stay mobile. As a true world class operation system you will have access to an amazing collection of over 700.000 apps in the Google Play store. Games, productivity apps, educational tools, entertainment and so much more, it will all be at your disposal whenever you need it.

Acting as a multimedia HUB, the “Ceros Motion” will keep all your media centralized. Store your apps, music, videos and pictures youve shot with the 5MP back camera on the 8GB of built-in memory and use a Micro SD Card to expand the storage even further. Connecting the Ceros Motion to your TV can quickly be done through the HDMI port and featuring the latest Bluetooth 4.0 standard, file transfer is smoother than ever. Ceros goes Beyond Imagination.

Download ACTIONS Pad Tools Pack

Posted by android team 0 comments

Download ACTIONS Pad Tools Pack from here, here or here.

ACTIONS Pad Tools Pack content:

- ACTIONS Pad Firmware Modify Tool_V1.08
- ACTIONS Pad Image Maker Tool_V1.02
- ACTIONS Pad Product Tool_V1.07.02

Download XBMC 13.0 Gotham – Release Candidate 1

Posted by android team 0 comments

We hope you are as excited about this as we are. After a year of hard work, improvements and testing since the release of version 12.0, we are delighted to announce the first release candidate of the upcoming XBMC 13.0, codenamed “Gotham”. The past year we have kept you informed with our monthly blog posts of all the exciting new features added to this upcoming release. Now, let’s review a few of those features we’re particularly excited about.

The features

Android Hardware Decoding
Raspberry Pi and Android speed improvements
Stereoscopic 3D Rendering
Improved Touchscreen Support
Improved UPnP capabilities
Dramatic Audio Engine Improvements
Settings Improvements
Making Subtitle Search Better
An Extended Python and JSON-RPC API for developers
Yet More Features
Skins

For the downloads go to:

* Windows
* OSX and OSX-x86-64
* Android-ARM and Android-x86
* Apple TV and iOS installation instructions
* XBMCbuntu (with beta4 is available on download page. You will need to update it to current beta version)
* Ubuntu users, please point to the “unstable PPA” as described in the Linux instructions
* For OpenELEC releases visit their website

Download MediaTek SmartPhone Driver Auto Installer v1.1236.00

Posted by android team Senin, 28 April 2014 0 comments

Download MediaTek Smartphone Driver Auto Installer v1.1236.00 from here, here or here.

This application will install USB com port driver x86 or x64 for MediaTek's device those IDs are listed below:

1."VID_0E8D&PID_0003"       (FeaturePhone & Smartphone BootROM - MTK USB Port)
2."VID_0E8D&PID_0023&MI_00" (FeaturePhone - MTK USB Modem Port)
3."VID_0E8D&PID_0023&MI_02" (FeaturePhone - MTK USB Debug Port)
4."VID_0E8D&PID_2000"       (SmartPhone - Preloaer USB Port)
5."VID_0E8D&PID_2001"       (SmartPhone - DA USB Port)
6."Vid_0E8D&PID_2006&MI_02" (SmartPhone - Kernel Gadget USB port, Please customize your kernel VID/PID)
"Vid_0E8D&PID_2007"
"Vid_0E8D&PID_200a&MI_02"

Download MTK Droid Root & Tools v2.5.3

Posted by android team 0 comments

Download MTK Droid Root & Tools v2.5.3 from here, here or here.
You can also download MTK Droid Root & Tools v2.4.6 & v2.5.2 from here .

How to make a scatter file for Mediatek MTK6582, MTK6595, MTK6589, MTK6592, MTK6577, MTK6589T, MTK6572 devices.

What you’ll need
- MTK / MediaTek based smartphone
- USB Data Cable
- USB ADB VCOM drivers
- MTK Droid Tools

What to do
Step 1 – Enable USB debugging
Step 2 – Install the PDANet USB ADB VCOM drivers
Step 3 – Download, extract, and run the latest version of MTK Droid Tools.
Step 4 – Your phone should be on at this point. Connect the data USB cable to your phone.
Step 5 – Click ‘blocks map’.
Step 6 – Click ‘create scatter file’. Navigate to where you want to save it. Save it in a place where you won’t lose it.

Before use it is necessary to check that:
- adb drivers are installed, in a device manager there shouldn't be unknown devices at connection of switched-on phone. ADB Drivers here.
- USB debugging in Developer options of System setting is allowed.

How to ReadBack ROM using SP FlashTool, to make the CWM recovery, to install SuperUser (get root) etc. If your phone is not rooted use the ROOT button.

1. Make scatter by means of MTKDroidTools
Scatter is the text file with addresses of the blocks, necessary for the SP FlashTool program. After creation of scatter don't close the main window of the program! Otherwise once again it is necessary to turn on phone.

2. In SP FlashTool choose this scatter and go on the Read Back tab.

3. Choose path and a ROM file name. Click on Add button. Double click of a mouse on the appeared line. Choose a file name, the name has to begin with ROM_ as offers FlashTool! Remember path and the name of ROM_ file.

4. Determine the ROM_ size. Type has to stand in HEX. In the field of Start Address it is necessary to write down 0x000000. In the field of Length we copy from scatter the address of the block following after RECOVERY or the address of other block for fuller backup. For phones with type of the blocks EXT4 it is the cache block address. The number in the Hex format has to begin with 0x

5 . Choose Read Page Only on yaffs2 type blocks phones. In FlashTool choose Read Page Only in the field of Read Method. If this field isn't present, the window with this question can emerge, too we choose Page Only. On phones with EXT4 blocks it doesn't get out (as a rule).

6. Read Back ROM_.Click on Read Back button and connect the switched-off phone to PC. Here the options depending on a concrete phone are possible. Maybe it is necessary to press at the same time with connect of a cable the camera or volume buttons. Experiment and study work with FlashTool in threads with similar phones! On some MT6573 models, for example on B63, it can't be executed with any combinations and only testpoint need!

7. Prepare files for FlashTool and make CWM. If everything passed without errorss, we open the MTK Droid Root & Tools window which we left on 1th step. If for some reason the window isn't present, it is necessary to turn on phone and to connect it to the program. Click on To process file ROM_ from FlashTool button and choose the ROM_* file saved on the 6th step. At successful unpacking rom it will be offered to choose CWM from similar phone. Chosen CWM it is checked on compliance to the connected phone and if ok, the CWM is created. Starting with v2.4.0 CWM it is made automatically and the file from similar phone shouldn't be looked for any more!
Аttention! Yaffs2 type blocks from this backup can't be Downloaded to phone, they aren't correct! Use backup on 9th step if phone have yaffs2 type blocks!

8. Download new CWM to the phone. Start FlashTool, choose scatter in the folder created on the 7th step. Remove marks from all blocks! Click on RECOVERY and we choose the file CWM in the same folder which was created on the 7th step. Click Download and connect a cable to PC (phone has to be switched off) and expect the end of process. DANGEROUS! On this step the CWM recovery block has to be marked only! Also it is necessary to use only the Download button and not to use at all the Firmware Upgrade button!

9. Make backup, install SuperUser etc. Load phone in CWM mode, connect to MTK Droid Root & Tools, go on the tab root, backup, recovery and, pressing on this tab the necessary buttons, we do:
- backup! (if in phone there is yaffs2 type blocks, do here surely, they received with readBack on 7th step aren't correct)
- install superuser (often mean "get root" under it)
- and other if need

Never needlessly Download preloader and DSP_BL blocks! It is always dangerous! On some models of phones (for example Alcatel) you will have a brick even if you download these blocks read from phone which you own! Always remove from them marks in SPFT!

MTK Droid Root & Tools User Guide

Don’t miss any of our future video tutorials, follow us on Youtube. Like us on Facebook. Add us in your circles on Google+. Watch our photo albums on Flickr. Subscribe now to our newsletter.

Download Android Jelly Bean 4.1 stock firmware for Acer Iconia Tab A210 tablet

Posted by android team 0 comments

You can download from below the Android Jelly Bean 4.1 stock firmware for Acer Iconia Tab A210 tablet:

- Acer.AV051.A210.RV07RC02.PA.CUS1 (50.9 MB) from here or from here.

This firmware version was officially launched by Acer on 2012/11/21.
Read the instruction manual carefully below before installing this firmware. Copy the update.zip on a micro SD card root directory without extract it and without rename the file.

via touchscreen-apps.blogspot.ro

Download MediaTek SP Flash Tool v5.13.52.200

Posted by android team 0 comments

Download MediaTek SP Flash Tool v5.13.52.200 from here, here or here. You can download SP Flash Tool v3.1332.0.187 from here.

What's needed:

USB data cable
MediaTek USB VCOM drivers (doawnload here, here or here)
SP Flash Tool

Download Android 4.0 ICS and Jelly Bean 4.1 stock firmware for Acer Iconia Tab A700 tablet

Posted by android team 0 comments

You can download from below the Android stock firmware for Acer Iconia Tab A700 tablet:

Android 4.0 Ice Scream Sandwich
- AV043.RV29RC02.JPN.GEN1 (330.2 MB)
- AV043.RV23RC02.EMEA.DE (338.2 MB)
- AV043.RV23RC06.PA.CA (339.4 MB)
- V043.RV23RC04.EMEA.FR (338 MB)
- AV043.RV23RC03.PA.CUS1 (343.1 MB)
- AV043.RV30RC01.AAP.HK (274.8 MB)
- AV043.RV23RC06.EMEA.CUS1 (335.9 MB)
- AV043.RV23RC07.TWN.GEN1 (342.2 MB)
- AV043.RV23RC05.EMEA.GB (342.2 MB)
- AV043.RV23RC05.WW.GEN1 (334.9 MB)
- Acer.AV043.A700.RV07RC06.PA.CU (333.5 MB)
- Acer.AV043.A700.RV23RC03.PA.CU (35 MB)

Android 4.1 Jelly Bean
- AV051.RV16RC02.WW.GEN1 (3.6 MB)
- AV051.RV16RC01.EMEA.DE (3.6 MB)
- AV051.RV19RC01.TWN.GEN1 (227.4 MB)
- AV051.RV10RC02.PA.CA (240.6 MB)
- AV051.RV16RC02.JPN.GEN1 (223 MB)
- AV051.RV10RC01.EMEA.CUS1 (235.9 MB)
- AV051.RV18RC01.EMEA.GB (388.5 MB)
- AV051.RV09RC08.WW.GEN1 (235.2 MB)
- AV051.RV18RC02.PA.CA (3.1 MB)
- AV051.RV10RC01.EMEA.FR (144.5 MB)
- AV051.RV18RC01.EMEA.FR (3.3 MB)
- AV051.RV09RC07.EMEA.DE (242.2 MB)
- AV051.RV18RC02.AAP.HK (3.4 MB)
- AV051.RV10RC04.AAP.HK (230.5 MB)
- AV051.RV18RC01.PA.CUS1 (3.6 MB)
- AV051.RV18RC01.EMEA.CUS1 (3.4 MB)
- AV051.RV09RC08.PA.CUS1 (243.6 MB)
- Acer.AV051.A700.RV18RC01.PA.CU (3.6 MB)
- Acer.AV051.A700.RV09RC08.PA.CU (385.3 MB)

Read the instruction manual carefully below before installing this firmware.

Copy the update.zip on a micro SD card root directory without extract it and without rename the file.

via http://touchscreen-apps.blogspot.com

E-ceros Smart Watch 4GB

Posted by android team 0 comments

Join the Versatile Watch Revolution
It seems like the last time anyone innovated the watch was to give it glow in the dark and a lap timer. Well, 1985 was almost 30 years ago.

Everything is multifunctional these days: your car has built-in maps, your phone has a thermometer, your coffee machine has a massage chair (okay maybe not that last one). So why shouldn’t your watch do more?
Watches should do more than just tell time. It’s time we had watches that surf the internet, take pictures and more.

Introducing the E-Ceros Smart – a watch that’s all that and more.

Watch Out. We’re Strapped.
Leave your phone at home. Out having fun, on your commute, in a new town – with Smart, you’ll have a carefree time. This Smartwatch does everything a phone does, except you will never drop, misplace or lose it because it’s strapped to your wrist. Safety and convenience come included with Smart.

Double the Power

Life is a balancing act, and CPUs are no different. That’s why we included an MTK6577 Dual Core processor in every Smart watch to distribute the workload and increase the speed up to 1GHz. This will come in handy while browsing the web, playing games, streaming and downloading apps.

Design That Says ‘Touch Me’

Not only does the E-Ceros Smart work fast and look great in pure black, it comes with a 1.56 inch capacitive touch screen that allows you to make the most from Android 4.0. Just wait until you retire your phone for this sleek machine. It’s going to feel great to liberate yourself and still keep in touch.

IP57 Waterproof Rating

When you wear a watch, you really don’t want to be bothered with water damage due to rain, intensive exercising or any other reason. The E-Ceros Smart recognized this problem with most other smart watches. Our team made sure that you can wear this watch with peace of mind, due to its IP57 waterproof rating.

Specifications
Operating System: Android 4.0
Hardware Chipset: MT6577 Dual Core
Speed: CPU 1.0GHz
RAM: 512MB
Screen: 1 Point Touch
Screen Size: 1.54 inch TFT
Display Resolution: 240×240
Ports/Slots/External Sensors: 1x Micro SIM Card, Micro USB
Internal Memory: 4 GB
External Memory: No
Battery Life: 100 Mins
Standby Time: 100hrs
Battery Capacity mAh: 600
Camera Resolution: 3MP (Interpolation 5MP)
Picture Formats: JPG, BMP, GIF, PNG
Video Formats: MP4, 3GP
Music Formats: MP3, WAV, AAC, MIDI
E-Book Formats: PDF, TXT
WiFi: YES (802.11 b/g/n)
3G: YES (via USB 3G Dongle)
Bluetooth: YES
Languages: Afrikaans, Bahasa Indonesia, Bahasa Melayu, Dansk, German, English, Spanish, French, Italian, Magyar, Dutch, Polish, Portuguese, Vietnamese, Turkish, Greek, Russian, Arabic, Thai, Korean, Chinese (Simp), Chinese (Trad), Japanese
Certifications: CE, FCC, RoHS
Dimensions (mm): 140 x 140 x 95 (L x W x H)

Price

You can buy E-Ceros Smart Nano Waterproof 3G Smartwatch from www.chinavasion.com for only 144.84 €.

Cube iWork 10 U100GT Windows 8 driver intallation package

Posted by android team 0 comments

Download Cube iWork 10 U100GT Intel Bay trail-T Quad Core 10.1 inch Windows 8 tablet driver intallation package from here, here or here.

Video HD: How to easily root E-ceros Vision tablet with VRoot One Key Tool

Posted by android team Minggu, 27 April 2014 0 comments

Hello guys.

This is a very simple video tutorial on how to easily root your E-ceros Vision tablet with Android Jelly Bean 4.2.2 OS.

3 simple steps to follow

1. Download latest version of VRoot tool from here and then install it on your PC.

2. Enable 'USB Debugging' on your tablet. For that go to 'Settings' --> 'About Tablet' --> and tap several times (7-8 times) on 'Build Number' (last row). Then go to 'Developper Options' just above the 'Avout Tablet' tab and enable (check) 'USB Debugging' option.

3. Connect your tablet to PC via USB cable; run Vroot, wait for it to recognize your tablet (in this case model CT1001) and then press on 'Root' green button. Your tablet will reboot and then you have to look for SuperUser app and run it. You can uninstall the chinesse application (daemon) installed on your tablet apps.

Download latest Vroot version 1.7.3.4863

Posted by android team 0 comments

Download latest Vroot version 1.7.3.4863 from here, here or here.

Vroot is an one-key root tool designed by Mgyun-team. Just click one button, you can root your mobile device immediately! It is very easy to use .Turn on the USB debugging mode, and connect your phone to the computer, then click the button "root" and now what you have to do is just waiting for the root result. Forget the complex and troublesome tutorials, everyone can control it easily.
Vroot's goal is providing the excellent and simplest experience for all android users. The newest version of Vroot have supported for more than 8000 kinds of Android devices. It is more effective, easier and faster than you can imagine.

- This requires a PC.
- No CWM needed.
- This tool can root also MTK6582 poweered devices, including new Tronsmart TS7.

Instructions
1. Download the rooting application. (This app can root many other devices)
2. Install the app. This is a Chinese app so I will guide you.
3. Start VROOT and root now!
4. Now we need to install SuperSU from play store to replace the Chinese root manager called 授权管理 1.0.4.
5. Go to play store and install SuperSU.

6. Start SuperSU and you will be asked for permission by 授权管理 1.0.4, choose 允许(means allow). (Should be the right side option.)

7. SuperSU will prompt to install SU binary, go ahead with OK and it will display successful.
8. Now, freeze 授权管理 1.0.4 in titanium backup, just in case you need it again.
Note: If you uninstall straight away from app manager, you need to make sure SuperSU updated the binary.
9. Re-run SuperSU to make sure everything is alright. You will be prompt again to install SU binary, just do what it asked.
10. After that, you are rooted with SuperSU and 授权管理 1.0.4 will not be there anymore.

Optional

11. If you want to be more assured, in SuperSU app, prepare for a Reinstall in settings. (NOT Full unroot NOT Switch superuser app)
12. SuperSU will be removed and go back to play store to re-download and install.
13. Start SuperSU and SuperSU will prompt to install SU binary, go ahead with OK and it will display successful.

Vroot Update Log

Version 1.7.3 - released on 2013-11-15
1. new millet 3, ZTE U988s, Pantech A880S other models
2. fixes in extreme cases will lift the root successful problem of false positives

Version 1.7.2 - released on 2013-10-29
1. supports the new system 4.3 Samsung S4 (eg I9500, I9505, I959 and other models)

Version 1.7.1 - released on 2013-10-18
1. the new Samsung NOTE3 free Brush root, does not affect the warranty (N9002, N9005, N9006, N9008, N9009, N900W8, N900S, N900K, N900L, N900A, N900T high pass Xiaolong 800 models)
2. repair some models will always remain in the 4.3 bug detection root privileges

Version 1.7.0 - released on 2013-09-13
1. added support for Android 4.3 a key root
2. improve the success rate of some models Spreadtrum
3. enhance Huawei Y320-T00, Y500-T00 models such as the success rate
4. to improve the success rate of a large number of Android 4.x Android 2.3 system and part of the system
5. optimize root process and shorten time-consuming for most models of root

Version 1.6.0 - released on 2013-08-26
1. to improve the success rate of a large number of Android 4.x root system and some 2.3
2. Android 4.3 can only get root privileges restricted, we will improve in the near future
3. bug fixes

Version 1.5.2 - released on 2013-08-13
1. the following new or improved models of a key ROOT:
Samsung I9100G, I9108, I9050, I9260, I9268, etc.
(Most of the use of TI Omap processor models can)
2. to improve the Marvell platform ROOT processes, improve the success rate
3. replace the phone icon client license management

Version 1.5.0 - released on 2013-08-01
1. simplifying the Huawei Y220T, Lenovo A298T, Hisense and other models T818 ROOT process to further improve the success rate of Spreadtrum platform
2. fix a Samsung I9502 may cause unexpected failures such as S4 models BUG

Version 1.4.3 - released on 2013-07-25
1. the following new or improved models of a key ROOT:
Samsung S4 series models: I9500, I959, I9502, E300S, E300L
Samsung S5830i/I869 KEAMEA/I9128 ZMAMC3/I9128V ZCAMD3
Samsung I739/I8190N/I9105P/I9082
Huawei G610C Telecom version, Sony M35h 12.0.A.1.211
ZTE N980, Cool 7268, Tianyu U90
2. Cool adjusted root prompt some models, to avoid unnecessary failures
3. repair some of the environment would have been in a "detection ROOT privileges," the BUG

Version 1.4.2 - released on 2013-07-02
1. the following new or improved models of a key ROOT: Cool: 7268. ZTE: U970 4.1 system, N909, N980, Samsung: I8552, I8190N, I869, I739, I9128, I9128V, I9082, Moto: XT910 9.8.2O-124_SPUEM-14, Sony: LT22i, L36h, M35h, LT26i, LT28h, LT26ii etc.
2. fixes in exceptional circumstances, the master can not connect the phone problems